Puur 8.00x165x265 mm MORSE KOONUS 1 HSS EXTRA-PIKK Serie 2 DIN1870RN ZV5001 STIMZET
kood
04170083
Saadavus:
Laos
58,72 €
/tk.
Toote hinnale lisandub käibemaks.
Extra long drills are recommended for deep-hole drilling by means of jig bushes of parts made of unalloyed or alloyed steel, cast steel up to 900 N/mm2, grey-, melleable- or nodular cast iron, sintered steel etc.
It is necessary to prevent form flute-stopping by frequet withdrawing the drill.
It is necessary to reduce the recommended cutting conditions regarding to the insufficient supply of the cutting fluid.
λ = 25°÷30° ε=118°
Puur KOONUS HSS EXTRA-LONG
Usability: Extra-long drills are recommended for deep-hole drilling by means of jig bushes of parts made of unalloyed or alloyed steel, cast steel up to 900 N/mm2, grey-, malleable- or nodular cast iron, sintered steel etc. It is necessary to prevent from flute-stopping by frequent withdrawing the drill. It is necessary to reduce the recommended cutting conditions regarding the insufficient supply of the cutting fluid.
Range: Ø 8,00 ÷ 50,0 mm
λ = 25° ÷ 30°
ε = 118°
Manufacturing Mode: V, F
Grinding Mode: Form A, C
ØD= 8,0÷14,0 MORSE 1
ØD= 14,5÷23,0 MORSE 2
ØD= 23,5÷31,5 MORSE 3
ØD= 32,0÷50,0 MORSE 4
ØD= 14,5÷23,0 MORSE 2
ØD= 23,5÷31,5 MORSE 3
ØD= 32,0÷50,0 MORSE 4
materjal | HSS / HSS-G |
---|