×

Keevitusaparaat WEST 160D kompl. 230V/6.50 kW 10- 160A (d.1.60-4.0) inverter DECA 278280

kood
27610144
Saadavus:
Tellimisel
Toote hinnale lisandub käibemaks.
WEST seeria on ette nähtud kasutamiseks nii töökodades kui ka välistingimustes ning sobib eelkõige hooldus-, remondi- ja tehnilisteks töödeks ehituses, põllumajanduses ja kergemas puidutöötlemises.

Keevituskvaliteet ja seadmete jõudlus vastavad selle segmendi kõrgetele standarditele.

Kõik mudelid on varustatud täpse professionaalse juhtimissüsteemiga, mis tagab stabiilse kaare süttimise ja ühtlase keevituskaare töö kõigis keevitusasendites.

Pildid on illustreeriva tähendusega
WEST 160 model delivers 160 Amps in direct current for welding with electrodes ranging from 1.6 to 4.0mm in diameter.
It is compatible with rutile and basic electrodes and can weld various metals, including steel, stainless steel, cast iron, etc.
The power supply voltage is single-phase at 230 Volts, and thanks to its low energy consumption, it can be used with reduced installed power.

WEST 160 is very easy to use with a single control knob and welding assistance systems:
Hot Start: Provides additional amps for the first few seconds during arc ignition, helping to reach the right temperature for the weld pool.
Arc Force: Reduces the risk of sticking the electrode to the workpiece.
Anti-sticking: If the electrode sticks to the workpiece, the welding current is reduced to a few amps, making it easier to detach the electrode.

TIG LIFT welding using a torch with a tap to control the shielding gas, allows minute work on small thickness mild steel and stainless steel sheets.
In TIG welding with LIFT arc striking, the tungsten electrode is placed on the work surface and slowly lifted to ignite the welding arc. This technique uses a low-intensity current to protect the electrode, while the welding machine gradually increases the amperage for a high-quality weld. The Slope down function with fixed parameter is integrated into the TIG welding process.

Standard equipment: Generator only.

TECHNICAL DETAILS
Process MMA DC
Technology INVERTER
Mains voltage 50/60 Hz 1 X 230V ± 15%
Absorbed power 60% – MAX 2,8 – 4,8 kW
Fuse 16A
Efficiency > 80%
WELDING PERFORMANCE
MMA Current rate 10 – 160A
MMA Duty cycle Max current (40°) 160A @ 25%
MMA Duty cycle 60% (40°) 100A
Open circuit voltage 100V
WELDING WIRES / ELECTRODES
Rutile electrode, (Ø mm) 1,6 – 4,0
Basic electrode, , (Ø mm) 2,0 – 4,0
TIG electrode, , (Ø mm) 1,6 – 2,4
CHARACTERISTICS
Portable yes
Output connections DX 25mmq
Fan cooling yes
Thermostatic protection yes
Dimensions 337X134X207
Weight approx kg 3,70
Lisainfo
Type Inverter
↑
Back to Top