×

Keermestajate ja keermelõikurite komplekt UNC1/4-3/4" 35tk. HSS-G TERAS kohver 48051 VÖLKEL

kood
18111014
Saadavus:
Laos
Soodushind 502,21 € Tavahind 627,76 € /tk.
Toote hinnale lisandub käibemaks.
Type of thread - Unified Coarse thread ANSI B 1.1
Pildid on illustreeriva tähendusega

Hand taps and round dies (set of 35 pcs.) UNC 1/4 – 3/4

Application:

for general use

• non abrasive material up to 900 N/mm²

• unalloyed and low alloyed steel

• for through and blind holes

• for thread cutting by hand

• HSS-G Hand taps acc. to ≈ DIN 352

• HSS Round dies acc. to DIN 223 (DIN EN 22568)

Type of thread Unified Coarse thread ANSI B 1.1
Material HSS-G
Standard DIN Standard
Packing in metal case
Size Diameter UNC 1/4 - 3/4

Contents:

 • 1x HSS-G Hand taps (set of 3 pcs.) UNC 1/4 (23314)

 • 1x HSS-G Hand taps (set of 3 pcs.) UNC 5/16 (23316)

 • 1x HSS-G Hand taps (set of 3 pcs.) UNC 3/8 (23318)

 • 1x HSS-G Hand taps (set of 3 pcs.) UNC 7/16 (23320)

 • 1x HSS-G Hand taps (set of 3 pcs.) UNC 1/2 (23322)

 • 1x HSS-G Hand taps (set of 3 pcs.) UNC 5/8 (23326)

 • 1x HSS-G Hand taps (set of 3 pcs.) UNC 3/4 (23330)

 • 1x HSS Round die UNC 1/4 (23414)

 • 1x HSS Round die UNC 5/16 (23416)

 • 1x HSS Round die UNC 3/8 (23418)

 • 1x HSS Round die UNC 7/16 (23420)

 • 1x HSS Round die UNC 1/2 (23422)

 • 1x HSS Round die UNC 5/8 (23426)

 • 1x HSS Round die UNC 3/4 (23430)

 • 1x Adjustable tap wrench, zinc die cast No. 1 (13010)

 • 1x Adjustable tap wrench, zinc die cast No. 3 (13030)

 • 1x Die stock, zinc die cast 20x7 mm (15003)

 • 1x Die stock, zinc die cast 25x9 mm (15004)

 • 1x Die stock, zinc die cast 30x11 mm (15005)

 • 1x Die stock, zinc die cast 38x14 mm (15007)

 • 1x Die stock, zinc die cast 45x18 mm (15009)

Back to Top